Siser EasyWeed Fluorescent HTV 158243 Rolls

The most trusted heat transfer vinyl brand in the world. Why is EasyWeedthe number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesnt lift during weeding. Its also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application thats great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser cutting systems. Approximate width is 14.75″ EasyWeed is CPSIA Certified so its perfect for decorating childrens clothing and accessories. Main FeaturesDIY APPARELPersonalize t-shirts, hoodies, pants, hats, bags, and so much more! EasyWeed allows you to customize a wide variety of fabrics including cotton, polyester, blends, leather, and more! EASYWEED ADVANTAGEEasyWeed is the leading HTV for a reason! Thanks to a sticky carrier backing, weeding even the smallest details is a breeze. EasyWeed also applies with a 1-second tack for layering and can be peeled hot no cooldown required! PREMIUM FEEL & QUALITYEasyWeed is just 90 microns thin which allows designs to feel incredibly lightweight when compared to other, thicker vinyls! Despite it’s thinness, EasyWeed is also extremely durable, lasting wash after wash without fading, cracking, or peeling for long-lasting designs. EASY APPLICATIONEasyWeed was designed to make the heat application process as painless as possible. Apply with a heat press set to 305F with medium pressure for 15 seconds. You can also apply EasyWeed with a home iron set to “Cotton” or “High”! Craft Cutter Settings (Chart)Siser Romeo & Juliet Blade: Romeo & Juliet 45 Gram Force: 5-10 Offset: 0.250 Speed: 10 Brother Scan N Cut DX Blade: Autoblade Cut Speed: 5 Half Cut: Auto Cricut Explore Air Blade: AutoBlade, Standard Setting: Vinyl+ Cricut Maker Blade: AutoBlade, Fine-Point Setting: Heat Transfer (Non-Cricut) Silhouette4 Blade: AutoBlade, 3 Material: Heat Transfer Smooth Force: 6 Speed: 8 Roland GS/GX-24 Blade: 45 Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s Graphtec Blade: 45 Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s Application Instructions Iron Instructions Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cover sheet Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Heating Press Instructions Cut in reverse Weed excess material Preheat garment for 2-3 seconds Apply design at 305F/150C Use medium pressure for 10-15 seconds Peel carrier hot or cold EasyWeed Applies to 100% cotton Poly/cotton blends 100% polyester Leather Laundering Instructions Wait 24 hours before 1st wash Turn item inside out Machine wash warm or cold / mild detergent Dry on normal dryer setting Do not dry clean